Friday, February 21, 2020

How to configure a Switch Virtual Interface


Topology

Step 1: Design the topology as per the topology diagram given above.

Step 2: Connect to Switch Console port andPC RS232 Port

Step 3: Go to PC ->Terminal ->Ok

Step 4: Give the following Command on Switch


Switch>enable
Switch#configure terminal
Switch(config)#interface vlan 1
Switch(config-if)#ip address 192.168.1.254 255.255.255.0
Switch(config-if)#no shutdown


Step5: Configure the PC with IP Address: 192.168.1.10, Subnet Mask: 255.255.255.0

Step 6: Connect to switch FastEthernet0/1 port and PC FastEther0 using a Straight through Cable.

Step 7:Verify Network Connectivity
               ping from PC to Switch


Ping 192.168.1.254


Show Commands used:


Switch#show running-config
Switch#showip interface brief



No comments:

Post a Comment

CCNA 200-301 Packet Tracer Labs